Combines motion detection with ambient light sensing for demand-based lighting—lights turn on when needed and off when not, maximizing energy savings.
Standard 0-10V Output
Provides 0/1–10V dimming interface for precise control of LED drivers and fluorescent ballasts, compatible with a wide range of commercial and industrial luminaires.
Compatible with EBELONG Kinetic Switches
Pairs with EBELONG wireless kinetic switches for battery-free, wire-free local control—simply stick anywhere for flexible installation.
Harvesting directly its energy from your push, the Door and Window Sensor doesn’t need any battery (and any wire) to operate
Advantages of a wireless system (flexibility) without the disadvantages (no battery = no maintenance)
This Door and Window Sensor can be mounted concealed in the door frame, it also can be mounted externally on the surface of door and being fixed with screws
Mount it, and forget it
Examples Of Use Cases
H6 Fixture Mounted BLE to 0-10 V PIR Sensor
| High Sensitivity | B4-5m |
| Medium Sensitivity | 3-4m |
| Low Sensitivity | 2-3m |
| Power supply | DC 12–24V |
| Dimming Control | Analog (0-10V) |
| Dimming Output | Max 20mA |
| Power Consumption | 25mA @ 12V，15mA @ 24V |
| Connector | 3 pin connectors |
| Detection Angle | 360° |
| Detection Diameter | Max 5m，@ 2.5m installation height |
| Mounting height | 2.5m |
| Occupancy Sensing Type | PIR sensor |
| Lux Detection Range | 0-10000Lux |
| Wireless Protocol | Casambi BLE Mesh |
| Communication Frequency | 2.4GHz |
| Transmit Power | +7dbm |
| Communication distance | Outdoor 50m，Indoor 25m |
| OTA Upgrade | Support Casambi OTA Firmware Update |
| Dimension | Ø31.8 x 39mm |
| Housing Material | PC |
| Mounting method | Fixture Mounted |
| IP Rating | IP 20 |
| Operating Temperature | -20 ~ +55℃ |
| Storage Temperature | -20 ~ +85℃ |
| Operating Humidity | 0%-85% RH，No condensation |
| Storage Humidity | 0%-85% RH，No condensation |
Support & Questions
Please contact us if you need the datasheet.