E2 Self-powered switch EBELONG

DALI-2 Push Button Wall Switch

DALI‑2 Certified – Future‑Ready Compatibility

Fully compliant with the DALI‑2 standard, ensuring seamless integration with any DALI‑2 certified drivers and control systems for an open and scalable lighting network.

Flexible Key Options – 2/4/6/8 Buttons

Available in 2‑, 4‑, 6‑, and 8‑key versions, allowing you to choose the right level of control for each room or application.

Standard 86‑mm Form Factor – Easy Retrofit
Designed to fit standard 86‑mm wall boxes (common in Asia), enabling quick replacement of conventional switches without wall modifications.

Intuitive & Clean Design
Minimalist aesthetics with clearly marked buttons make operation self‑explanatory, ideal for hotels, offices, and residential spaces.

GD1/2 A standard kinetic wall switch
  • No wires no batteries

    No wires no batteries

    Completely wireless. Powered by kinetic energy generated from simply pressing the switch.

  • Easy to install

    Easy to install

    Mount the switch with screws or adhesive tape.

  • Standard style

    Standard style

    Adapt to European standard switch size.

  • Zigbee green power

    Zigbee green power

    Zigbee green power protocol is directly connected to Tuya gateway.

Examples Of Use Cases

GD series DALl-2 push button wall switch

EBELONG E2 Wireless kinetic energy switch
Input TypeDALI
MarkingDA, DA
Input Voltage Range12VDC – 22.5VDC (according IEC62368-101)
Typ. Current Consumption DALI (at 16.5V)2mA
Max. Current Consumption DALI (Inrush Current at 22.5V)10mA
Number of Addresses for DALI Control GearDALI
Number of Addresses for DALI Control Devices8 programmable push buttons
Number of Feedback LED8 programmable LEDs
Dimensions (L x W x H)GD-1:80mm x 80mm x 19mm GD-2:86mm x 86mm x 19mm
MountingWall Mounting or on Conduit Box
Max. casing temperature Tc75°C
Expected Life Time @Tc50,000H
Protection ClassII in Intended Use
Protection Degree HousingIP20
Protection Degree TerminalsIP20
FunctionConfigurable
Start-up Time<150ms
Connector TypePush-In
Wire Size Solid Core0.2 – 1.5 mm2 (AWG26 – AWG16)
Wire Size Fine Core0.2 – 1.5 mm2 (AWG26 – AWG16)
Wire Size Using Wire End Ferrule0.25 – 1.0 mm2
Stripping Length9 – 10 mm / 0.35 – 0.39 inch
Release ConnectorPush Button
Storing Temperature-20°C~+50°C
Working Ambient Temperature-20°C~+50°C
Relative Humidity8%- 80%
DALIIEC62386-101:2014 IEC62386-103:2014 IEC62386-301 IEC62386-332
EMCEN 61547 EN 50015 / IEC CISPR15
SafetyEN 61347-2-11 EN 61347-1
MarkingsDALI-2, CE

Support & Questions


Contact Us

0086-755-27888758

E-mail:info@

Working Hours: Monday to Friday 8:30~18:00