Enables you to control the appliances, lights... Without changing any single appliance, make your home smarter.
Switch on / off your appliances remotely
Compatible with the EBELONG worldwide smart home / smart building protocol, this controller is mounted in your ceiling, in your wall , and will turn any dumb device into a smart device.
Based on ISM band and ebelong protocol, switch and receiver connect wirelessly.
High‑strength double‑sided tape – no screws, no wall damage.
MEA micro‑energy harvesting – converts press kinetic energy into electricity instantly.
Each controller stores up to 10 switches – enables multiple‑to‑one or one‑to‑multiple control.
Examples Of Use Cases
C6 Series | 10A on/off controller
| Product model | ERC604 |
| Power supply | AC100V ~ 240V 50/60Hz |
| Operating current | 10A |
| Maximum output power | LED load: 1000W (220V~) Resistive load: 2200W (220V~) |
| Radio frequency | RF 433MHz |
| Operating range | Up to 80m outdoors Up to 25m indoors (May vary depending on conditions) |
| Operating temperature | -20℃ ~ +55℃ |
| Memory capacity | Maximum 10 switches |
| Dimensions | L88.8*W43.7*H30.9mm |
| Certifications and standards | Europe EN 60669-1:2018 EN 60669-2-1:2004+A1:2009+A12:2010 ETSI EN 301489-1 V2.2.3(2019-11) ETSI EN 301489-1 V2.1.1(2019-03) EN 55032:2015 EN 55035:2017 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+2019 ETSI EN 300220-1 V3.1.1(2017-02) ETSI EN 300220-2 V3.2.1(2018-06) |
Support & Questions
Please contact us if you need the datasheet.