This ultra small size controller is mounted in your ceiling, in your wall or behind your electrical socket.
You can make your lighting system smart by adding this product.
Dual channel control, cost saving
Turn your generic lights into a remotely controllable lighting system. Retrofit easily and without any construction work. Just add a new batteryless and wireless kinetic switch and this controller.
Built on ZigBee 3.0 for strong compatibility and a more stable mesh network for long-term smart home use.
Supports direct pairing with ZigBee Green Power kinetic switches, reducing wiring work and allowing direct use without a gateway in some applications.
Keeps traditional wired switch control while also supporting wireless switches, gateway-based control, and voice-enabled smart operation.
Compact enough for hidden installation inside switch boxes or light fixtures, with up to 5A output for a wider range of lighting and appliance loads.
Examples Of Use Cases
C22 Series | 5A on/off dual controller
| Product model | RF version ERC2202 WiFi version ERC2202-W ZigBee version ERC2202-Z |
| Power supply | AC100V ~ 240V 50/60Hz |
| Inputs | 1 input for existing wired switch |
| Max Load | 5A(1 way) LED load: 500W(220V~) |
| Radio frequency | RF version: RF 433MHz WiFi version: WiFi 2.4G + RF 433MHz ZigBee version: ZigBee 2.4G + RF 433MHz |
| Operating range | Up to 80m outdoors Up to 25m indoors (May vary depending on conditions) |
| Operating temperature | -20℃ ~ +55℃ |
| Memory capacity | Maximum 10 switches |
| Dimensions | L44*W44*H22mm |
| Certifications and standards | EN 60669-1: 2018 EN 60669-2-1:2004+A1:2009+A12:2010 EN 62479:2010 EN 50665:2017 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 300 220-1 V3.1.1 (2017-02) ETSI EN 300 220-2 V3.2.1 (2018-06) |